Sunday, January 24, 2010
Sound
Well, Ive done a little work on the sound circuit as shown below. Since ive removed the variable resistor from the circuit and basically added a extension cord, ive had to make up a bracket for it
Sunday, January 3, 2010
Work continues
Well, now its coming up on a year of being going, sigh. Epic Project.
Today I have debugged the sound system (Lost a channel of audio, pulled the whole thing apart and later found it was the wire snapped off its solder on the audio circuit, and was stuck in place with the plastic so I couldn't tell it had snapped), got the 240V wiring done, and finialized the audio circuits.
I decided to put the audio circuit in the top part of the box, to help de-clutter the base. This will mean more wires needed to run to the base (as the volume control variable resistor requires 5 wires) but will easily fit.
Today I have debugged the sound system (Lost a channel of audio, pulled the whole thing apart and later found it was the wire snapped off its solder on the audio circuit, and was stuck in place with the plastic so I couldn't tell it had snapped), got the 240V wiring done, and finialized the audio circuits.
I decided to put the audio circuit in the top part of the box, to help de-clutter the base. This will mean more wires needed to run to the base (as the volume control variable resistor requires 5 wires) but will easily fit.
 New workplace |  Mains circuit complete |
 Mains wiring halfway |  Audio circuit finished |
Subscribe to:
Posts (Atom)