IT LIVES!

Yeah, I couldnt wait, (Plus the guy whos painting it is coming over Friday to see what im describing) so i re-fitted it together. Then went a bit mad with double-sided velcro and velcroed the speakers in and the monitor in. End result, is very very much what it will be like.

What a blast to play on.

Can you splice a DVI-D single channel cable?

YES YOU CAN. WHEE. Yep, that mishapen lump is the splice in the DVI cable I did with just twisting wires and duct tape, and yes, that's the actual cable the monitor is running of. Ill call her Frankensplice.

Well, at some point I had to face splicing a monitor cable. I was going to use VGA, but i found a old DVI-D cable lying around. I never saw the difference in image quality so it ended up in the magical box of spare cables.

However, I decided to research the difference for this project (as the video card is DVI out and the LCD supports VGA and DVI input) and found one massive surprise: While I really couldn't see the difference in quality on the LCD (as I believe newer LCD's are very good at converting the analogue VGA signal) I did notice one thing: The scaling and repositioning of the screen was gone.

Under VGA, the screen has to detect where and how to fit the screen, resulting in it flickering on and off, changing in size and sliding around to fit. This was annoying on my test runs as it happened going into each game, and sometimes (5-10%) it wouldnt get it right and slide the screen a centimeter to the left, obscuring part of the screen.

DVI DOES NOT DO THAT. It displays the image crisp and clear, no flickering and always in the right position instantly. I didnt know this beforehand!

So it had to go in. Question was, was it possible to splice the cable without signal degredation? I have to fit the cable through a loom tube (just big enough for the cables between top and bottom), I certaintly couldnt get the connector through. Downside was, this cable is sheilded with tiwsted pairs, and removing these for a splice has a risk of interupting data, much like untwisting CAT-5 can make the cable less than optimal in use.

What was more fun: Not only did it look scary enough when I opened it up (four pairs of sheilded wire, with 5 lying speerate = 13 cables), but when I got into it i found a third uninsulated wire inside each of the four shielded pairs (4 times 3 + 5 = 17 cables!)

So I had a go as a trial run before the real deal next build time, and I got it right the first time without solder or heatshrink. All I did was twist the wires and insulate with duct tape. Little help sourced from this thread: http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=44543&start=0.

Im going out tommorow to invest in some heatshrink and a small blowtorch for the real deal, which will be done with a lot more precision in care. This was just the test run, proof of concept to ensure I could actually do it.

Cable or a HL1 Headcrab? You decide.	Om Nom Nom Nom. Nearly set me back 30 mins work, thanks cat.
Halfway through, sheilded pairs done	Added some old dowel to help reduce mechanical force acting on join.

Speaker Epic Deveat

The speakers I had installed seemed like epic win. They fit well and cranked out some tunes from my Ipod. Or so I thought.

It wasn't until later I unplugged my Ipod and plugged it into my PC. The noise. Oh the noise. I thought having it plugged into the running PC and into my Ipod was a good test. Apparently not. It had the most horrible line noise ever. So that USB speaker idea went in the bin after hours of trying to fix it. EPIC DEVEAT.

So I ended up going back to my old 2.0 powered speakers, which are working even better.

Deveat (Verb): Something that seems like complete fail, but has a hidden win.
Antonym(s): See VICTOLY

So Ive had to redo the speakers with a powered set. The sound quality is much improved, with NO LINE NOISE. Huzhaa.

Ive also completed the top wiring in terms of 240V power. I had to use a junction box and split of another mains for the powerpack for the new speakers.

Re-done speakers.	Testing the junction wiring
Looks safe	Completed wiring

Ive also done some work on the Jukebox side of things, and neatend up the playlist (also got something for all the album artwork)



EDIT: My first Bubble Bobble Million.

Day 5 (?) Casebuilding

I think Ive missed two days. Oh well.


Case sat together in its closed position


Case in the open position

Another day of work brought us to this. The top part is assembled, and just needs the speakers and LCD put in.

The word of the day was DREMEL. I used it a lot, for sanding out slots for the speakers and LCD, to cutting the mounting out of the speakers (As we couldnt just screw the speakers to the wood)

As for the speakers, I had to sand out some of the pine reinforcment to fit the speakers.

Speaker mount removed from casing	Hole cut and sanded out
Mounts glued in place with liquid nails	Speakers mounted

We also got the LCD fitted (but not mounted) at this point.

LCD from front

Dremel line where we had to sand back the pine to fit the LCD